Overview; Venting Options - Valor PORTRAIT 530INI Installation & Owner's Manual

Venting Options

Rear view
Co-linear appliance, as supplied
(2 x 3" diameter liners)
530INI/IPI as supplied
Co-linear installation into existing F/P
Flashing
3" min. 2 x 3"
bend radius liners
530
engine
25-1/2"

Overview

Approved co-linear
termination or approved
co-linear adapter
and approved
co-axial
termination
40'
max
8'
min
2 x 3"
liners
Note: 536/541/563 fronts require a closure plate
(582/583CPB) to ensure proper positioning of
casting. Other fronts are supplied with a backing
plate included.
530INI/IPI with 720SWK—Sidewall Kit
Sidewall co-linear installation into existing F/P
using 720SWK—for units with logs or rocks only
(see installation instructions supplied with 720SWK)
720SWK
Terminal
Min. 3'-0"
*Max. 5'-0"
* May be extended beyond 5'-0". Refer to the 720SWK
*Beyond 5'-0" , the sidewall terminal may be
installation instructions
used but will require restrictors. See 530 section
QUALIFIED
INSTALLER
3" min.
Bend
Radius
3" Liners
19