Avtech AVC799B User Manual page 34

E-MAIL
When this function is enabled and an event occurs, a html file including a link will be sent to the specified E-mail
address. Click the link to access to this DVR and check the event recording.
CANERA NETWORK SNTP FTP E-MAIL DDNS
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
DCCS
IVS
NOTIFY
EXIT
1) E-MAIL ALERT
Select "ON" to enable this function, or "OFF" to disable this function.
2) SMTP SERVER
Enter the SMTP server address provided from your e-mail system supplier.
3) PORT
Enter the port number provided from your e-mail system supplier. If this column is left blank, the e-mail
server will use port 25 to send e-mails.
4) MAIL FROM
Enter the sender's name.
5) SSL ENCRYPTION
Select "ON" if your e-mail server is using SSL encryption to protect your e-mail content from unauthorized
access.
6) VERIFY PASSWORD
Some mail servers are required to verify the password. Please enter the "user name" and "password".
7) USER NAME / PASSWORD
Enter the "user name" and "password" when "VERIFY PASSWORD" is set to "ON".
8) RECEIVER
Select "SETUP" to add up to 15 e-mail addresses of the assigned recipients.
DDNS
You need to additionally set DDNS when your network type is PPPOE or DHCP.
We have our own DDNS server for quick DDNS service configuration. You don't need to additionally apply a
DDNS service.
To use our own DDNS server, select "default" in "SYSTEM NAME".
The default host name is the MAC address of the DVR.
Then, note down the whole address under "CURRENT HOST ADDRESS", such as
MAC000E5318B3F0@ddns.dvrtw.com.tw. This is the default IP address used to access your DVR remotely.
Note: Please at least use the default address to access your DVR remotely once. This is to ensure our
DDNS server has your DVR registered. Then, you may change the host name to a more
meaningful name to memorize later here.
ADVANCED CONFIG
E-MAIL ALERT
SMTP SERVER
PORT
MAIL FROM
SSL ENCRYPTION
VERIFY PASSWORD
USER NAME
PASSWORD
RECEIVER
ON
SMTP.GMAIL.COM
465
MANAGER
ON
ON
MANAGER
●●●●●●
SETUP
28
MAIN MENU