Camera Connection; Normal Camera Connection - Avtech AVC799B User Manual

Step4: Replace the bracket back to the DVR.
Note: Step5 ~ 7 are applicable for AVC794B, AVC794C & AVC793C Only.
Step5: For installing another HDD, find the supplied HDD brackets in the package, and fix them onto the
DVR base.
Step6: With the PCB side facing up, connect the compatible HDD to the power connector and data bus
connector.
Step7: Then, put the HDD in the bracket, and fasten it with the supplied screws, two for each side.
Step8: Replace the top cover and fasten the screws you loosened in Step1.

2.2 Camera Connection

The cameras must be connected and power-supplied before the DVR is powered on. Connect the camera with the
indicated power supply. Then, connect the camera video output to the DVR video input port with a coaxial cable or
RCA cable with BNC connectors.
Note: For detailed DVR video input ports, please refer to "1.3 Rear Panel" at page 2.

2.2.1 Normal Camera Connection

Note: For detailed camera installation and connection, please refer to its own user manual.
1) Connecting to DVR video input
Connect the camera video output to the DVR video input port with a coaxial cable or RCA line with BNC
connector.
2) Connecting to DVR audio input (Optional)
Connect the camera audio output to the DVR audio input port with a coaxial cable or RCA cable with BNC
connectors.
3) Connecting to power
Connect the camera with indicated power supply and make sure it's power-supplied.
5
CONNECTION AND SETUP