Fuel Tank Assembly And Installation - AeroWorks ProX260 ARF-QB Assembly Manual

FUEL TANK ASSEMBLEY AND INSTALLATION
1. Gather the Fuel Tank parts as shown below.
◊
1 - Fuel tank
◊
1 - Fuel tank stopper assembly
◊
1 - 2' of glow fuel line
◊
2 - Large Nylon ties
◊
4 - Threaded tank mounting eyelets
2. Temporally mount wing to fuse and place fuel
tank on the fuse just in front of the wing as
shown below. Mark the location of the tank
mounting eyelets using a black felt tip pen.
3. Install the 4 threaded eyelets as shown below.
Note: Thick CA may be used on the threads of the
eyelets to ensure they don't loosen from
vibration.
4. Finished stopper and clink assembly shown be-
low.
Note: Carburetor line will also be used to fuel and
defuel tank.
Note: Use small nylon zip ties to secure fuel line to
clunk and tubes.
31