FUEL TANK ASSEMBLY AND INSTALLATION
Fuel Tank Assembly (Gasoline)
1. Gather the fuel tank parts as shown below. Fuel
tank, hardware, brass barbs and fuel tubing.
Note: Rubber stopper supplied for both Gas and
Glow fuels. Make sure to select the correct
stopper for your selection of fuel used.
2. Locate the (2) supplied brass fuel barbs. Solder a
brass fuel barb to the fuel line pick up tube. This
will keep the weight of the fuel clunk from pull-
ing the fuel line off the brass tube.
Note: No brass barbs are required for the air vent
lines.
3. Assemble the fuel pick up line, rubber stopper
and metal end caps. As shown below.
4. Solder a brass fuel barb to the other end of the
fuel pick up line.
52