Table of Contents
Advertisement
FUEL TANK ASSEMBLY AND INSTALLATION
Fuel Tank Assembly
1.
Gather the fuel tank parts as shown below.
Fuel tank parts, fuel tubing, nylon ties and
foam rubber.
2.
Assemble the fuel tank as shown below.
Secure the fuel tubing with nylon ties to the
pick-up tube and clunk.
Note: It is important to solder a barb to the fuel
line pick up. This will keep the weight of the
fuel clunk from pulling the fuel line off the
brass tube.
(Barbs are Supplied)
3.
Insert the rubber stopper into the tank with the
vent tube at the top of the tank. Secure the
stopper with set screw.
Take care not to strip threads by over tighten
set screw
Fuel Tank Installation
1. Gather the fuel tank parts as shown below. Fuel
tank, fuel tubing, foam rubber, fuel "T", fuel
filler dot, and nylon ties.
Note: The fuel "T" and fuel filler dot are not
supplied, but are available through Aeroworks.
70
Hide quick links:
Advertisement
Table of Contents
