Control Throw Deflection Table - AeroWorks ProX260 ARF-QB Assembly Manual

Control Throw Deflection Table

.46-.60 ProX260
Low Rate
Aileron 1 1/2 " or 20˚ up
1 1/2 " or 20˚ down 2 1/2" or 30˚ down
Rudder N/A" or 25˚ left
N/A" or 25˚ right
Elevator 7/8" or 12˚ up
7/8" or 12˚ down
For 3D flying use the following throws:
3D Rate
Aileron 4" or 45˚ up
4" or 45˚ down
Rudder N/A" or 50˚ left
N/A" or 50˚ right
Elevator 4" or 45˚ up
4" or 45˚ down
We recommend 15% Expo on low rates, 30%
expo on high rates, and 60% expo on 3D rates
as a starting point. You a can adjust from there
to suit your own flying style.
High Rate
2 1/2" or 30˚ up
N/A" or 35˚ left
N/A" or 35˚ right
1 3/4" or 25˚ up
1 3/4" or 25˚ down
39
Control Throw Deflection Table
.60-.90 ProX260
Low Rate
Aileron 2 " or 20˚ up
2 " or 20˚ down
Rudder N/A" or 25˚ left
N/A" or 25˚ right
Elevator 1" or 15˚ up
1" or 15˚ down
For 3D flying use the following throws:
3D Rate
Aileron 4 1/4" or 40˚ up
4 1/4" or 40˚ down
Rudder N/A" or 50˚ left
N/A" or 50˚ right
Elevator 3 1/2" or 45˚ up
3 1/2" or 45˚ down
We recommend 15% Expo on low rates, 30%
expo on high rates, and 60% expo on 3D rates
as a starting point. You a can adjust from there
to suit your own flying style.
High Rate
3" or 30˚ up
3" or 30˚ down
N/A" or 35˚ left
N/A" or 35˚ right
2" or 25˚ up
2" or 25˚ down