MV Agusta F4 S Workshop Manual page 260

FRONT WHEEL REMOVAL
Place the motorcycle on the rear stand.
Special tool N. 800092642
Front brake caliper removal
F
Unscrew the two fixing screws of both front calipers
and remove the calipers.
Protect the disassembled calipers with pro-
tective material thereby avoiding possible
damage to the wheel rim. Hold the calipers
appropriately, in order not to charge the
brake pipes. Pay attention not to bend the
brake pipes in order to avoid any damages.
Lift the motorcycle up at the front end.
Mount the special tool that is supplied with a pin on the
lower part of the steering base as shown in the figure.
Lift the motorcycle up.
Special tool No. 800095807 and No. 800095808
Suspension and wheels
- 4 -