Substitution And Bleeding Of The Front Brake Fluid (F4 Rr) - MV Agusta F4 S Workshop Manual

SUBSTITUTION AND BLEEDING OF THE FRONT
BRAKE FLUID (F4 RR)
Place the motorcycle on a horizontal surface with the
steering in a straight line.
It is advisable to remove the nose fairing when carry-
ing out this operation.
Remove the two screws of the front brake fluid cham-
ber cover.
Brake fluid has a strong corrosive power.
Be careful to not spill the fluid on surround-
ing parts.
If the fluid is spilt clean immediately with
industrial alcohol and dry with compressed
air.
Remove the protection cap of the bleed valve of the
front right caliper.
Put in the steering key, then fit a rubber tube on to the
dump screw (on top of the brake calliper).
Put the other end of the rubber tube in a suitable con-
tainer.
H
Pull the brake lever without releasing it.
Slacken the bleed valve and empty the brake system.
Tighten again the bleeding screw, before releasing the
brake lever.
Brakes
- 10 -