Motor Oil System Filling - MV Agusta F4 S Workshop Manual

MOTOR OIL SYSTEM FILLING

Unscrew filler plug using the 10-mm hexagonal bar
provided fitted to a specially designed spanner (see
figure).
Pour in the required quantity of oil.
Check the level of oil in the appropriate window.
Before replacing the filler plug, grease O-ring (1) with
silicone grease, then reinsert it into its seat (see fig-
ure).
Tighten plug (2) with the prescribed torque.
Torque pressure: 35 N·m
Cooling system
- 27 -
MAX
MIN
1
35 N•m
L
1
2
2