MV Agusta F4 S Workshop Manual page 269

FRONT FORK OVERHAUL
(F4 S - F4 FT - F4 R - F4 MY13)
Before removing and overhauling the front suspension
components, it is advisable to remove the lower fairing,
the left and right fairings, the front cowl, the air ducts,
the front mudguard, the spoiler, the left and right wire
harness covers and the side panels as described in
detail in the chapter "Fairings".
Support the motorcycle by the rear stand with special
tool.
Special tool No. 800092642
Remove the front wheel as described in the chapter
"FRONT WHEEL" for the vehicle model.
Remove the fixing screw (1) of the holding clamp (2) of
the brake line and remove the clamp.
Repeat operations for the opposite side.
Remove the left clip-on handlebar by unscrewing the
screws shown in the figure. Protect the clip-on handle-
bar with protective material.
Utilise the same procedure for the right clip-on handle-
bar.
The protection of the clip-on handlebars is
necessary to stop scratching painted parts of
the motorcycle.
Suspension and wheels
- 13 -
2
1
F