MV Agusta F4 S Workshop Manual page 299

Tighten the central fixing screw (1) of the steering
head.
Torque pressure: 22 ÷ 24 N·m
Tighten the two front fixing screws (2) of the steering
head.
Torque pressure: 16 ÷ 18 N·m
Block the steering damper in position by tightening
the two fixing screws (3) to the frame.
Torque pressure: 8 ÷ 10 N·m
Steering damper adjustment
(F4 RR MY13)
Refer to the values contained in the table to adjust the
steering damper.
The adjustment of the steering damper
NOTE
can be performed only by operating the
digital functions of the dashboard. For
the modification of these parameters,
refer to the procedures described at page
79 of Section B - "Maintenance".
F4 RR MY13
Normal
Steering damper 10 clicks 10 clicks 10 clicks
Steering damper adjustment
(F4 S - F4 FT - F4 RR MY12 - F4 R - F4 MY13)
The standard adjustment is obtained by fully rotating
the knob counterclockwise. In this position the damper
offers the least resistance to the rotation of the stee-
ring. To suit the rider's needs, the action of the damper
can be gradually increased by rotating the knob
clockwise.
Refer to the values contained in the table to adjust the
steering damper.
F4 S - FT - R - F4 MY13
Steering damper
F4 RR MY12
Steering damper
Suspension and wheels
Type of set-up
Sport Rain
Type of set-up
On road On race track
2 clicks 2 clicks
Type of set-up
On road On race track
0 clicks 3 clicks
22÷24 N•m
16÷18 N•m
F4 S - FT - F4 R
- F4 MY13
- 43 -
1
2
3
8÷10 N•m
Adjusting knob
F4 RR MY12
F