How To Check The Dirt Of Drain Pan (Maintenance); The Method Of Checking The Dirt Of Drain Pan; Attention For Removing Drain Pan - Mitsubishi Heavy Industries FDC112KXEN6 Technical Manual

(vii) How to check the dirt of drain pan (Maintenance)

The method of checking the dirt of drain pan

● It is possible to check the dirt for inlet of drain pan without detaching the panel.
(Inspection is not possible when the high efficient filter and option spacer is installed.)
q Open the air return grille and remove the panel corner cover on drain pan side.
w Remove the cover of inspection window. (1screw)
e Check the drain pan from the inspection window.
If the drain pan is very dirty, remove the drain pan and clean it.
r After checking of the dirty of drain pan, restore the cover of the inspection window securely. Improper restoration of the
cover may cause dew condensation and water leakage.

Attention for removing drain pan

● The fixing components have been attached the with drain pan. Pay attention to these components during installation and
removing. Take off the hanging hook after removing four screws. During the installation of drain pan, fix the drain pan
firmly by using four screws after hanging it up with the fixing hook.
anel
Cornercover
rain pan
Fixing piece
178
-
Available checking part
for inlet of drain pan.
Cover of
checking
window
Remove the screws
Rotate the hook
-