Mitsubishi Heavy Industries FDC112KXEN6 Technical Manual page 301

(iii) Precedence of display
[Exx] > [Related to check operation ([CHJ] > [CHU])] > [PdE] > [PdS]> [oPx] > [Cxx]
➀
If resetting from the display of ➀ , it is switched to [C00].
➁
If SW8 or SW9 is pressed during the display of ➀ , it changes to [C00].
➂
However, unless no button input is done for 10 seconds after change to [C00], it changes to the display of ➀
automatically according to the precedence.
Display switching
➃
Special display is the display other than [CXX].
[CXX]
Button operation
* If the special display is reset in the meanwhile, it remains as [CXX].
When special
display occurs
Special display
Button operation
No operation for 10 seconds*
[C00]
297
– –
Special display reset
or
button operation