Safety Standards; Emc Standards - Microsemi SyncServer S200 User Manual

Frequency: 1575.42 MHz (L1 signal)
Code: Coarse Acquisition (C/A) code
Tracking: Up to 12 satellites. All 32 PRN's.
Position Accur- Typically <10m w. four satellites. Available from web interface.
acy:
1PPS Accur- 50 nS RMS, 150 nS Peak to UTC-USNO
acy:
Time standard: UTC
Signal strength: 1 sat ≥ -166 dBW to acquire, and ≥ -171 dBW to track.
≤ 150 ft. of Belden 9104 (RG-59 type)
Cabling options:
n
300 ft. with inline amplifier
n
Compatible with down/up converter
n
Also see:
GPS Antenna
n
GPS Cable Configurations/Options (see
n
on page 105)

Safety Standards

Meets the following safety standards:
73/23 EEC CE Low Voltage Safety Directive
n
EN 60950-1:2001
n
UL 60950-1:2003
n
CSA 22.2 60950-1:2003
n
IEC 60950-1:2001
n
AS/NZ 60950-1:2003
n
PSE Japan
n

EMC Standards

Meets the following EMC standards:
FCC Part 15 Subpart B
n
2004/108/ECCE EMC Directive
n
EN55022 (1998) EMC Emissions for ITE, Class A
n
EN55024 (1998) EMC Immunity for ITE
n
EN61000-3-2 (2000)Harmonic Current Emissions
n
EN61000-3-3 (1995)Voltage Fluctuations and Flicker Emissions
n
VCCI: April 2000Japan EMC Standard
n
ICES-003Canada EMC Standard
n
AS/NZS CISPR 22:2002Australia/New Zealand EMC Standard
n
997-01520-02 Rev.
"Distance Between Antenna and
G2..........................................................................
Safety Standards
Receiver"
Page 87