Factory Default Settings - Microsemi SyncServer S200 User Manual

Factory Default Settings

Login - default settings
Login - Default Settings
User Name:admin
Password:symmetricom
See also: Changes to Passwords and User Names (see
Passwords" on page 20)
Network Ports - default settings
Network Ports - Default Settings
Port IP Version IPv4 Address
LAN1 IPv4 Static - 192.168.0.100 Auto Negotiated Enabled
LAN2
LAN3
SNMP
SNMP - Default Settings
Basic Configuration
sysLocation:unknown
sysName:SyncServer
sysContact:admin@localhost
Read Comunity:symmpublic
Write CVommunity:symmprivate
NTP
NTP - Default Settings
997-01520-02 Rev.
Link Speed
G2..........................................................................
Login - default settings
"Properties of User Names and
State
Disabled
Disabled
Page 171