Microsemi SyncServer S200 User Manual page 82

Command Line Interface
Entering halts and reboots the SyncServer's operating system. Enter "Y" to confirm.
REBOOT
For example:
1 ? REBOOT
Reboot SyncServer operating system? Enter "Y" to confirm: Y
HALT example
Entering halts the operating system. Do this before turning the power switch off. Enter
HALT
"Y" to confirm. Enter "Y" to confirm. For example:
> HALT
Halt SyncServer operating system? Enter "Y" to confirm: Y
IPV4ADDRESS example
Entering displays/sets the IPv4 address. For example:
IPV4ADDRESS
1 ? IPV4ADDRESS
192.168.47.150
2 ? IPV4ADDRESS 192.168.46.144
IPV4MASK example
Entering IPV4MASK displays/sets the IPv4 subnet mask. For example:
3 ? IPV4MASK
255.255.255.0
4 ? IPV4MASK 255.255.0.0
IPV4GATEWAY example
Entering IPV4
GATEWAY
5 ? IPV4GATEWAY
192.168.47.1
6 ? IPV4GATEWAY 192.168.46.1
Page 82..........................................................................997-01520-02 Rev. G2
displays/sets the IPv4 gateway address. For example: