Wizards-Restore; Wizards-Upgrade - Microsemi SyncServer S200 User Manual

Table of Contents

Advertisement

WIZARDS-Restore

Use the WIZARDS - Restore page to restore a saved configuration from a backup file, or to
restore the factory default configuration.
Reset to Factory Defaults: Returns the SyncServer to its original factory configuration, remov-
ing ALL user-entered and operational information including password, IP addressing, GPS
position, and time zone. See SYSTEM - Factory Reset (on page 53).
Restore Last Backup from SyncServer: Restores the configuration as it was when the user cre-
ated the most recent backup configuration file. The backup file is located in the SyncServer's
nonvolatile memory.
Restore From USB flash drive: Restores the configuration from a backup file located on a USB
drive attached either of the USB ports on the front panel.
Restore backup from workstation hard-drive or network directory: Restores the configuration
from any backup file located on local or network drive accessible to the browser.
Note: Resetting or restoring the configuration reboots the SyncServer. If LAN1 is configured
to use DHCP, the DHCP server may assign a new IP address to LAN1. If needed, use the
front panel STATUS button to view the new IP address on the LAN1 STATUS screen.

WIZARDS-Upgrade

Use WIZARDS - Upgrade to update the SyncServer software.
SyncServer upgrade packages are available at http://www.microsemi.com/ftdsupport
and then following the links from the  Support menu
Users are required to register in order to download software. Some export restrictions may
apply.
To upgrade the software, download the upgrade package file to:
A file area that is accessible to the web browser.
n
To a USB flash drive, or to an area where it can be copied to a USB flash drive.
n
Then use WIZARDS - Upgrade to copy the upgrade file to the SyncServer and perform the
upgrade.
Note: The SyncServer automatically decompresses the software upgrade ".tar" file. Please
do not decompress the ".tar" file prior to upgrading the SyncServer.
997-01520-02 Rev.
G2..........................................................................
 WIZARDS Tab
Page 71

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SyncServer S200 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Syncserver s250iSyncserver s250

Table of Contents

Save PDF