Halting The Syncserver - Microsemi SyncServer S200 User Manual

Halting the SyncServer
Also see Stratum (on page 181).

Halting the SyncServer

Microsemi recommends shutting the operating system down before removing the power.
Using the keypad/display interface:
1. Press the MENU button.
2. Select 3) Shutdown.
3. Select 1) Yes.
4. Press the ENTER button.
5. When the display shows "System Stopped - OK to Turn Power Off Now!" turn the power
off.
Or, using the web interface:
1. Go to the SERVICES - Startup page.
2. Select Halt and click the APPLY button.
3. Wait approximately 30 seconds before removing power.
997-01520-02 Rev. G2.......................................................................... Page 15