Table of Contents
Advertisement
VA
DOOR
REMOVAL
(1) Disconnect and isolate battery negative cable.
(2) Open door and disengage check arm from
receiver. (Fig. 2)
(3) Using a grease pencil or equivalent, mark the
outline of the door hinges on the door to aid in instal-
lation.
(4) Support door with a suitable lifting device.
(5) Remove the bolts and remove the door. (Fig. 3)
Fig. 2 CHECK STRAP
1 - RECEIVER
2 - DOOR CHECK
Fig. 3 DOOR HINGES
1 - DOOR
2 - TORX BOLTS (2 PER HINGE)
3 - ALLEN BOLTS (1 PER HINGE)
DOORS - REAR 23 - 25
Advertisement
Table of Contents
