Table of Contents
Advertisement
VA
SHIFT MECHANISM (Continued)
Fig. 206 Disengage Park Lock Cable From SLA
1 - PARK LOCK CABLE COUPLING
2 - LOCK TAB
3 - BOLT
4 - SHIFT LEVER ASSEMBLY (SLA)
5 - CONNECTOR
(7) Unscrew bolts (1) (Fig. 207).
(8) Move selector lever to position P .
(9) Remove the SLA (2) from the vehicle.
Fig. 207 Remove SLA
1 - BOLT
2 - SLA
3 - SHIFT CABLE
AUTOMATIC TRANSMISSION - NAG1 21 - 135
INSTALLATION
(1) Position the shift lever assembly (SLA) onto
the vehicle.
(2) Install the bolts to hold the SLA to the vehicle.
Tighten the bolts to 6 N·m (53 in.lbs.).
(3) Connect the park lock cable coupling (1) (Fig.
208) to the SLA. Press locking tab (2) together and
push coupling (1) against the spring force into the
SLA, twist through 90° (right or left) until locked.
(4) Connect the connector plug (5) to the SLA.
Fig. 208 Engage Park Lock Cable to SLA
1 - PARK LOCK CABLE COUPLING
2 - LOCK TAB
3 - BOLT
4 - SHIFT LEVER ASSEMBLY (SLA)
5 - CONNECTOR
(5) Turn on ignition and apply brakes. Move selec-
tor lever back to position D .
(6) Install the transmission shift cable onto the
ball knob at the SLA.
(7) Install the bottom (2) (Fig. 209) of the center
section of instrument panel.
(8) Install the top (3) (Fig. 210) of the center sec-
tion of instrument panel.
(9) Verify repair.
Advertisement
Table of Contents
