Table of Contents
Advertisement
23 - 32
DOORS - REAR
DOOR GLASS (Continued)
NOTE: Remove any mineral spirits with a clean
cloth after glass installation.
(6) Verify that the seal is seated in the window
opening (Fig. 12).
(7) Test the window for water leaks. (Refer to 23 -
BODY - DIAGNOSIS AND TESTING - WATER
LEAKS)
Fig. 12 Glass & Weatherstrip Seal Installation
1 - BODY PANEL
2 - WEATHERSTRIP SEAL
3 - INSTALLATION CORD
4 - WINDOW OPENING
EXTERIOR HANDLE
REMOVAL
(1) Remove handle bolt. (Fig. 13)
NOTE: Front door shown, rear door similar.
(2) Slide handle assembly towards front of door.
(Fig. 14)
NOTE: Front door shown, rear door similar.
(3) Pull rear of handle out away from door and dis-
engage the latch levers.
(4) Slide handle towards the rear of door and
remove.
Fig. 13 EXTERIOR HANDLE
1 - EXTERIOR HANDLE BOLT
2 - LATCH
3 - LATCH BOLTS (3)
Fig. 14 LATCH/HANDLE FASTENERS
1 - EXTERIOR HANDLE
2 - DOOR
VA
Advertisement
Table of Contents
