Table of Contents
Advertisement
VA
FRONT DOOR INNER BELT WEATHERSTRIP
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
INSTALLATION
. . . . . . . . . . . . . . . . . . . . . . . . . 87
FRONT DOOR OUTER BELT WEATHERSTRIP
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
FRONT DOOR INNER BELT
WEATHERSTRIP
REMOVAL
(1) Remove the front door trim panel. (Refer to 23
- BODY/DOOR - FRONT/TRIM PANEL - REMOVAL)
(2) Remove the inner belt weatherstrip.
INSTALLATION
(1) Install the inner belt weatherstrip.
(2) Install the trim panel. (Refer to 23 - BODY/
DOOR - FRONT/TRIM PANEL - INSTALLATION)
FRONT DOOR OUTER BELT
WEATHERSTRIP
REMOVAL
(1) Remove door glass. (Refer to 23 - BODY/DOOR
- FRONT/DOOR GLASS - REMOVAL)
(2) Remove screws at window channel and remove
channel.
(3) Remove outer belt weatherstrip.
INSTALLATION
(1) Install outer belt weatherstrip.
(2) Install glass run channel and install the
screws.
(3) Install the door glass. (Refer to 23 - BODY/
DOOR - FRONT/DOOR GLASS - INSTALLATION)
WEATHERSTRIP/SEALS
TABLE OF CONTENTS
page
WEATHERSTRIP/SEALS 23 - 87
INSTALLATION
. . . . . . . . . . . . . . . . . . . . . . . . . 87
DOOR OPENING SEALS
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
INSTALLATION
. . . . . . . . . . . . . . . . . . . . . . . . . 87
DOOR OPENING SEALS
REMOVAL
(1) Open door and separate the door opening seal
from the door opening flange.
INSTALLATION
(1) Position the seal to the bottom of the door
opening, with bulb facing outboard, starting the
installation at the center of the lower flange. Press
the seal onto the sill flange and work around the
perimeter of the door opening until fully seated.
Work in one direction, smoothing the seal to avoid
puckers or wrinkles.
(2) When installing a new weatherstrip on the
front door opening, remove the tear strip starting at
the splice and moving around the front of the door to
the back of the opening.
page
Advertisement
Table of Contents
