Table of Contents
Advertisement
23 - 42
DOORS - SLIDING
SLIDING DOOR (Continued)
DISASSEMBLY
(1) Remove door.(Refer to 23 - BODY/DOORS -
SLIDING/REAR LATCH STRIKER - REMOVAL)
(2) Remove inside door handle actuator (7). (Refer
to 23 - BODY/DOORS - SLIDING/INSIDE HANDLE
ACTUATOR - REMOVAL)
(3) Remove center roller arm cover (23). (Fig. 16)
(4) Remove trim panel (24). (Refer to 23 - BODY/
DOORS - SLIDING/TRIM PANEL - REMOVAL)
(5) Remove lock knob (27).
(6) Disconnect lock rod (25) and remove.
(7) Remove rear latch (22). (Refer to 23 - BODY/
DOORS - SLIDING/REAR LATCH - REMOVAL)
(8) Remove latch/lock control (14). (Refer to 23 -
BODY/DOORS - SLIDING/LATCH / LOCK CON-
TROL - REMOVAL)
1 - SLIDING DOOR
2 - UPPER ROLLER ARM
3 - BOLTS (2)
4 - TRIM PLUG
5 - BOLTS (2)
6 - STABILIZER PIN
7 - INSIDE HANDLE ACTUATOR
8 - SCREWS
9 - TRIM PLUG
10 - EXTERIOR HANDLE
11 - TRIM PLUG
12 - BOLT (1)
13 - NUT
14 - LATCH/LOCK CONTROL
15 - BOLT
(9) Remove exterior handle (10). (Refer to 23 -
BODY/DOORS - SLIDING/EXTERIOR HANDLE -
REMOVAL)
(10) Remove center roller arm (20). (Refer to 23 -
BODY/DOORS - SLIDING/LOWER ROLLER ARM -
REMOVAL)
(11) Remove stabilizer wedges (6). (Refer to 23 -
BODY/DOORS
REMOVAL)
(12) Remove upper roller arm (2). (Refer to 23 -
BODY/DOORS
REMOVAL)
(13) Remove bolts (28) and remove crash reinforce-
ment (29).
Fig. 16 SLIDING DOOR ASSEMBLY
16 - BOLT
17 - RELEASE CABLE
18 - WASHER
19 - BOLT
20 - CENTER ROLLER ARM
21 - RUBBER COVER
22 - REAR LATCH
23 - COVER
24 - TRIM PANEL
25 - CONNECTOR ROD
26 - GROMMET
27 - LOCK KNOB
28 - SCREWS
29 - CRASH REINFORCEMENT
-
SLIDING/STABILIZER
-
SLIDING/UPPER
VA
-
ROLLER
-
Advertisement
Table of Contents
