Mercedes-Benz 2005 Sprinter Service Manual page 1003

VA
PARK LOCK CABLE (Continued)
Fig. 188 Loosen Park Lock Cable From Ignition
1 - IGNITION SWITCH
2 - PARK LOCK CABLE
Fig. 189 Remove Park Lock Cable From Ignition
1 - IGNITION SWITCH
2 - PARK LOCK CABLE
(5) Connect the park lock cable coupling (1) (Fig.
192) to the shift lever assembly (SLA). Press locking
tab (2) together and push coupling (1) against the
spring force into the SLA, twist through 90° (right or
left) until locked.
Switch
Switch
AUTOMATIC TRANSMISSION - NAG1 21 - 127
Fig. 190 Install Park Lock Cable to Ignition Switch
1 - IGNITION SWITCH
2 - PARK LOCK CABLE
Fig. 191 Tighten Park Lock Cable to Ignition Switch
1 - IGNITION SWITCH
2 - PARK LOCK CABLE
(6) Install the bottom section (2) (Fig. 193) of the
center section of instrument panel.
(7) Install the top section (3) (Fig. 194) of the cen-
ter section of instrument panel.
(8) Connect battery.
(9) Verify repair.