Installation Instructions - Belling FSE 60 MF User's Manual & Installation Instructions

Hide thumbs Also See for FSE 60 MF:
Table of Contents

Advertisement

INSTALLATION INSTRUCTIONS

Whilst every care is taken to eliminate
burrs and raw edges from this product,
please take care when handling - we
recommend the use of protective
gloves during installation.
Moving the cooker
Please note that the weight of this
appliance is approximately 60kg
(unpacked). Take care if the appliance
needs to be lifted during installation -
always use an appropriate method of
lifting.
Do not attempt to move the cooker by
pulling on the doors or handles. Open
the door and grasp the frame of the
cooker, taking care that the door does
not shut on your fingers.
Take care to avoid damage to soft or
uneven floor coverings when moving
the appliance. Some cushioned vinyl
floor coverings may not be designed
to withstand sliding appliances without
marking or damage.
Important: Ensure that you route
all mains cables well clear of any
adjacent heat source.
Clearances
This cooker may be fitted flush to
base units. However, for models with
side opening doors, we recommend a
side clearance of 60mm between the
cooker and any side wall to allow the
door to be opened fully.
The cooker should not be placed on a
base.
No shelf or overhang or cooker hood
shall be closer than a minimum of
650mm, but check with cooker hood
manufacturer's recommendations.
The cooker must have a side
clearance above hob level of 90mm
up to a height of 400mm.
Dimensions
All sizes are nominal, and some
variation is to be expected.
'depth' of the cooker, as given below,
is to the front of the door and
excluding knobs and handles.
Width:
Depth:
Height (adjustable):
Levelling the cooker
Turn the feet by hand to adjust the
height of the cooker.
36
The
600mm
600mm
900 - 915mm

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents