Table of Contents
Advertisement
To set the time of day
N
Press the Up and Down buttons
together for a few seconds, and
release.
N
The 'G' in between the numbers on
the LED Display will begin to flash.
N
While the 'G' is flashing it is possi-
ble to adjust the time using the Up and
Down buttons.
been set, allow approximately 30 sec-
onds before using any of the other
timer functions. This ensures that the
time will remain correct.
To select an alarm tone
There are three tones to chose from.
N
Press and hold the down button to lis-
ten to the first tone.
N
Release the down button and press it
again to listen to the second tone etc.
N
Releasing the down button after the
tone has sounded will automatically
select that tone
PROGRAMMER / CLOCK
Once the time has
Setting the minute minder
N
To set the Minute Minder, press the
Function button once. The bell symbol
will appear and start flashing.
flashing only lasts for 5 seconds so the
time must be set within this time frame.
N
Use the Up and Down button to set
the length of time required. Once this
has been done, the Minute Minder is
set.
N
When the desired length of time has
counted down the alarm will sound.
N
To cancel the tone, press any of the
buttons.
N
To cancel the Minute Minder at any
time, press the Up and Down buttons
together.
29
The
Hide quick links:
Advertisement
Table of Contents
