Table of Contents
Advertisement
Glass parts
,
FACIA PANEL
DOOR PANELS
Use a mild cream cleaner - eg; "Cif".
Rinse thoroughly and dry with a soft
cloth.
Important: The inner door glass
panel(s) can be removed for cleaning,
but they must be replaced the right
way (so the reflective side faces
inwards) and also pushed fully in to
the stop position. To remove the glass
panel, open the door wide, hold the
edges of the glass and slide out.
Painted, plastic and metal finish
parts (if fitted)
,
CONTROL KNOBS
DOOR HANDLES
Only use a clean cloth wrung out in
hot soapy water.
Chrome plated parts
&
OVEN SHELVES
GRILL PAN TRIVET
Do not use abrasives or polishes, use
a moist soap pad - eg; "Brillo".
Note: Oven shelf runners can be
removed for cleaning.
runners, and slide out of the hanging
holes as shown.
Note: These items may also be
cleaned in a dishwasher.
Pull out to clean
CARE & CLEANING
OVEN SHELF RUNNERS
Grasp the
Stainless Steel surfaces (stainless
steel finish models only)
FACIA PANEL
Only use a clean cloth wrung out in hot
soapy water, and dry with a soft cloth.
Do not use undiluted bleach or any
products containing chlorides as they
can permanently damage the steel.
Extra care should be taken when cook-
ing food in salted water. Some foods
are corrosive - eg; vinegar, fruit juices
and especially salt - they can mark or
damage stainless steel if they are left
on the surface. Turn off and wipe any
spillage immediately, taking care to
avoid skin contact with any hot surface
or spillage.
Sharp objects can mark the surface of
stainless steel, but marks will become
less noticeable with time.
,
To maintain the finish of the stainless
steel, or to remove any greasy marks,
wipe the stainless steel surface sparingly
with a minimum amount of Baby Oil
and kitchen paper.
Do not use cooking oils, as these may
contain salt, which can damage the
stainless steel surface.
34
,
,
HANDLES
DOOR PANELS
Hide quick links:
Advertisement
Table of Contents
