Cleaning - Belling FSE 60 MF User's Manual & Installation Instructions

Caution: Any cleaning agent
used incorrectly may damage
the appliance.
Always let the appliance cool
before cleaning.
Do not use a steam cleaner on
this appliance.
Some cooking operations generate
considerable amount of grease, this
combined with spillage can become a
hazard if allowed to accumulate on
the appliance
cleaning. In extreme cases this may
amount to misuse of the appliance and
could invalidate your guarantee.
It is recommended that the appliance
is cleaned after open roasting.
Do not use caustic, corrosive or
abrasive cleaning products, products
containing bleach, coarse wire wool
or any hard implements, as they will
damage the surfaces.
All parts of the appliance can be
safely cleaned with a cloth wrung out
in hot soapy water.
Vitreous enamel parts
,
GRILL PAN TOP OVEN
MAIN OVEN COMPARTMENT FLOOR
Use a mild cream cleaner - eg; "Cif".
Look for one which has the Vitreous
Enamel Development
recommendation seal.
Stubborn marks may be removed with
a moistened "Brillo" pad.
The grill pan may be cleaned in a
CARE & CLEANING
through lack
/
GRILL COMPARTMENT
Council's
dishwasher, or with a nylon brush in
hot soapy water.
Easy care surfaces
MAIN OVEN SIDES AND BACK
We recommend that the appliance is
cleaned after open roasting, and also
after roasting at temperatures higher
than 200˚C, to help prevent a build up
of fats. Use of a trivet in a roasting tin
when roasting will help reduce fat
splashing.
of
Caution: Most types of cleaning
agent will damage these surfaces.
Only use a few drops of washing up
liquid in hot water. Wipe the surfaces
with a clean cloth wrung out in hot soapy
water - if larger splashes of fat do not
readily disappear, scrub the area with
a nylon brush or nylon pan scourer
and hot soapy water. Rinse well and
heat the oven to dry the surfaces.
,
33