Epson RC180 Safety And Installation page 60

2. Installation
G6 : Table Top Mounting
■ Install the Table Top Mounting Manipulator with two or more people.
WARNING
(1) Secure the base to the base table with four
bolts.
Use bolts with specifications conforming
NOTE
to ISO898-1 Property Class: 10.9 or 12.9.
(2) Using nippers, cut off the wire tie binding
the shaft and arm retaining bracket on the
base.
(3) Remove the bolts securing the wire ties
removed in step (2).
(4) Remove the shipping bolt and jigs.
46
The Manipulator weights are as follows. Be careful not to get hands,
fingers, or feet caught and/or have equipment damaged by a fall of
the Manipulator.
G6-45** : Approximately 27 kg: 60 lb.
G6-55** : Approximately 27 kg: 60 lb.
G6-65** : Approximately 28 kg: 62 lb.
Sheet
Wire tie
Bolt
:M5×15
RC180 Safety and Installation Rev.18
4-M8×40
Spring
Washer
Plane
Washer
20 mm
Screw Hole
(depth 20 mm or more)
Bolt
:M4×15