Epson RC180 Safety And Installation page 59

G3 : Multiple Mounting
■
WARNING
■ When installing the Manipulator to the wall, support the
(1) Unpack the manipulator with
(2) Secure the base to the wall with
NOTE
(3) Remove the shipping bolt and
RC180 Safety and Installation Rev.18
Install the Multiple Mounting Manipulator with two or more people.
The Manipulator weights are as follows. Be careful not to get
hands, fingers, or feet caught and/or have equipment damaged by
a fall of the Manipulator.
G3-301*M : approx. 14 kg: 31 lb.
G3-351*M : approx. 14 kg: 31 lb.
Manipulator, and then secure the anchor bolts.
support without securing the anchor bolts properly is extremely
hazardous and may result in fall of the Manipulator.
retaining the arm posture.
four bolts.
Use bolts with specifications
conforming to ISO898-1 Property
Class: 10.9 or 12.9.
jigs.
2. Installation
Removing the
Screw Hole
(depth 20 mm or more)
Plane Washer
Spring Washer
4-M8×30
45