Table of Contents
Advertisement
2. Installation
G3 : Table Top Mounting
■ Install the Table Top Mounting Manipulator with two or more people.
CAUTION
(1) Secure the base to the base table
with four bolts.
Use bolts with specifications
NOTE
conforming to ISO898-1 Property
Class: 10.9 or 12.9.
(2) Using nippers, cut off the wire tie
binding
retaining bracket on the base.
(3) Remove the bolts securing the
wire ties removed in step (2).
(4) Remove the shipping bolt and
jigs.
44
The Manipulator weights are as follows. Be careful not to get
hands, fingers, or feet caught and/or have equipment damaged by
a fall of the Manipulator.
G3-251* : approx. 14 kg: 31 lb.
G3-301* : approx. 14 kg: 31 lb.
G3-351* : approx. 14 kg: 31 lb.
the
shaft
and
arm
Wire tie
RC180 Safety and Installation Rev.18
4-M8×30
Spring
Washer
Plane
Washer
Screw Hole
(depth 20 mm
or more)
10 mm
Bolt
:M4×15
Sheet
Advertisement
Table of Contents
