Receiving Faxes - Canon Laser Class 2050P User Manual

l-1100.book Page 27 Friday, December 13, 2002 5:07 PM

Receiving Faxes

Problem
The machine cannot
receive faxes
automatically?
The machine will not
switch between
telephone and fax calls
automatically?
Chapter 13
HT1-2205-000-V.1.0 LSL User's Guide
Possible cause
The machine may not be set
to receive automatically.
The machine may have a
document in memory,
leaving very little or no
memory available.
An error may have occurred
during reception.
The paper cassette/the
multi-purpose tray may be
empty.
The telephone line may not
be connected properly.
The machine may not be in
Fax/Tel Mode.
The machine may have a
document in memory,
leaving very little or no
memory available.
Frequently Asked Questions
Solution
For the machine to receive
faxes automatically, it must
be in FAX ONLY MODE,
ANS.MACHINE MODE, or
Fax/Tel Mode. See page 7-2.
Print out any documents
stored in memory.
See page 8-2.
Check the LCD display for
an error message. See page
13-38 for a listing of the
machine's error messages.
Print an activity report and
look for an error code. See
page 12-2.
Make sure the paper
cassette/the multi-purpose
tray has paper in it.
Make sure all telephone line
connections are secure.
For the machine to switch
automatically between
telephone and fax calls, it
must be in Fax/Tel Mode.
See page 7-2.
Print out any documents
stored in memory. See page
8-2.
13-27