Using Group Dialing - Canon Laser Class 2050P User Manual

l-1100.book Page 27 Friday, December 13, 2002 5:07 PM

Using Group Dialing

To send a document to a group of numbers, follow these instructions.
N
Be sure to adjust the document feed lever before loading your document.
See page 6-6 for more details.
1. Prepare the document and load it, face down, into the Automatic
2. Enter the group(s) stored under a One-Touch Speed Dialing button(s)
Chapter 5
HT1-2205-000-V.1.0 LSL User's Guide
Document Feeder (ADF).
❏ If necessary, you can adjust the resolution and contrast. See page
6-13 for more details.
and/or Coded Speed Dialing code(s).
Ex:
03
Ex:
Coded Dial
2 1
❏ If you make a mistake when selecting a group, press Stop and
start again.
❏ The name registered under that One-Touch Speed Dialing button
or Coded Speed Dialing code is displayed. If no name is
registered, GROUP DIAL is displayed.
❏ If you press a One-Touch Speed Dialing button or Coded Speed
Dialing code that has no group (or fax number) registered under
it, the LCD displays NO TEL #. Make sure you press the correct
One-Touch Speed Dialing button or enter the correct Coded
Speed Dialing code, and that the group you want has been
registered correctly under that button or code.
T E L = G R O U P D I A L
0 3 U S A G R O U P
T E L = G R O U P D I A L
✱ 2 1 U S A G R O U P
5-27
Speed Dialing