Table of Contents
Advertisement
l-1100.book Page 14 Friday, December 13, 2002 5:07 PM
3. Continue with the operation you wish to complete.
Setting the Scan Contrast
Contrast is the difference in brightness between the lightest and darkest
parts of a printed document. You can adjust the contrast machine uses
when scanning documents to be sent. STANDARD is the default setting
and is adequate for most documents. To darken a light original, set to
DARKER; to lighten dark originals, use LIGHTER.
1. Open the One-Touch Speed Dialing panel.
2. Press Data Registration.
3. Press Set twice.
4. Use
5. Press Set.
6-14
Sending Faxes
HT1-2205-000-V.1.0 LSL User's Guide
❏ If you do not proceed with any other operation, the LCD display
returns to standby mode after about 10 seconds.
Data
Registration
Set
Set
or
to select 5.SCAN CONTRAST.
Set
❏ The currently set scan contrast is displayed.
1 2 / 3 1 / 2 0 0 2 T U E 1 0 : 0 0
F a x T e l
S T A N D A R D
R E G I S T R A T I O N
1 . D A T A R E G S T R A T I O N
D A T A R E G S T R A T I O N
1 . U S E R S E T T I N G S
U S E R S E T T I N G S
1 . D A T E & T I M E
U S E R S E T T I N G S
5 . S C A N C O N T R A S T
S C A N C O N T R A S T
S T A N D A R D
Chapter 6
Advertisement
Table of Contents
