User Settings - Canon Laser Class 2050P User Manual

l-1100.book Page 4 Friday, December 13, 2002 5:07 PM

USER SETTINGS

For details on accessing the settings below, see page 15-3.
Setting
1.DATE & TIME
2.UNIT
TELEPHONE #
3.UNIT NAME
4.TX TERMINAL ID
TTI POSITION
TELEPHONE #
MARK
5.SCAN
CONTRAST
6.OFFHOOK
ALARM
7.VOLUME
CONTROL
CALLING VOLUME Selects the ring volume when the machine detects a voice call. 1/2/3
KEYPAD VOLUME Selects the keypad touch beep volume.
ALARM VOLUME Selects the error alarm volume.
LINE MONITOR
VOL
8.RX CALL LEVEL
9.TEL LINE TYPE
(Default settings are shown in bold type)
15-4
The Menu System
HT1-2205-000-V.1.0 LSL User's Guide
Description
Sets the current date and time. (See page 3-9.)
Enters the fax/telephone number you want to appear
at the top of each fax page you send. (See page 3-10.)
Enters the name or company name you want to appear at the
top of each fax page you send. (See page 3-10.)
Prints your ID (transmitting terminal ID) on each page of the
document you transmit. (See page 3-8.)
Selects whether the sender information is positioned inside or
outside the image area. (See page 3-8.)
Selects the prefix for the machine number. (See page 3-8.)
Selects the scanning contrast. (See page 6-14.)
Enables/disables the off hook alarm that alerts you
that the handset is not seated properly in its cradle.
Sets the volume of the machine sounds.
Selects the line monitor volume. (sound during dialing)
Selects the ring type for incoming calls.
Selects the telephone line type setting for your machine. (See
page 3-12.)
Sub-Settings
–
–
–
OUTSIDE IMAGE
INSIDE IMAGE
FAX
TEL
STANDARD
DARKER
LIGHTER
ON
OFF
–
0 (off)/1/2/3
0 (off)/1/2/3
0 (off)/1/2/3
HIGH
STANDARD
TOUCH TONE
ROTARY PULSE
Chapter 15