Table of Contents
Advertisement
l-1100.book Page 7 Friday, December 13, 2002 5:07 PM
What Happens When Fax/Tel Mode is Selected
Type of call
Telephone charges
begin for caller.
RING START TIME
(Factory default
setting = 8 sec.)
F/T RING TIME
(Factory default
setting = 15 sec.)
You can select these options in the RX MODE submenu of the RX
SETTINGS menu when Fax/Tel Mode is selected.
Chapter 7
HT1-2205-000-V.1.0 LSL User's Guide
Telephone
Sending document
The machine answers without ringing
The machine listens for fax tone
(For 8 sec.)
fax tone is not detected
The machine starts ringing
If you do not pick up the handset
(within 15 sec.)
DEFAULT ACTION
Choose between:
RECEIVE (factory default setting) and DISCONNECT
RECEIVE
(Factory default setting)
Not all fax machines are capable of sending a fax
tone. For those cases if you set the DEFAULT
ACTION to RECEIVE, the machine switches to
receive mode automatically and starts receiving
the document. If no document comes in, it
disconnects after approximately 45 seconds.
Fax
Fax
Sending document
manually
automatically
fax tone
Document received
detected
automatically .
(fax tone is detected and
the machine switches
to receive mode.)
Pick up the
handset to talk.
DISCONNECT
The machine
disconnects the call.
Receiving Faxes
7-7
Advertisement
Table of Contents
