l-1100.book Page 6 Friday, December 13, 2002 5:07 PM
REPORT SETTINGS
For details on accessing the settings below, see page 15-5.
Setting
1.TX REPORT
PRINT WITH
IMAGE
2.RX REPORT
3.ACTIVITY
REPORT
(Default settings are shown in bold type)
15-6
The Menu System
HT1-2205-000-V.1.0 LSL User's Guide
Description
Enables/disables automatic printing of a TX (transmission)
REPORT. (See page 12-4.)
PRINT ERROR ONLY: Prints a report only when a
transmission error occurs.
OUTPUT YES: Prints a report every time you send a
document.
OUTPUT NO: No report is printed.
If you select PRINT ERROR ONLY or OUTPUT YES above,
this setting enables/disables printing of the first page of the fax
under the report.
Enables/disables automatic printing of an RX (reception)
REPORT. (See page 12-7.)
OUTPUT NO: No report is printed.
PRINT ERROR ONLY: Prints a report only when a reception
error occurs.
OUTPUT YES: Prints a report every time you receive a
document.
Enables/disables automatic printing of an ACTIVITY REPORT
after every 20 transactions. (See page 12-2.)
Sub-Settings
PRINT ERROR ONLY
OUTPUT YES
OUTPUT NO
ON
OFF
OUTPUT NO
PRINT ERROR ONLY
OUTPUT YES
AUTO PRINT ON
AUTO PRINT OFF
Chapter 15