l-1100.book Page 14 Friday, December 13, 2002 5:07 PM
POLLING BOX
For details on accessing the settings below, see page 15-13.
Setting
1.SETUP FILE
FILE NAME
PASSWORD
TX PASSWORD
ERASE AFTER TX Set whether the machine erases a document after it has been
2.CHANGE DATA
PASSWORD
3.DELETE FILE
PASSWORD
(Default settings are shown in bold type)
15-14
The Menu System
HT1-2205-000-V.1.0 LSL User's Guide
Description
Set up a polling box to hold a document until it is polled by and
sent to another machine. (See page 9-6.)
Enter a file name (24 characters).
Enter a password to protect the polling box settings.
Enter a 20-digit (max.) ITU-T password.
polled.
ON: Document is erased from the polling box after it is polled
and sent.
OFF: Document is not erased and remains in the polling box
after it is polled and sent.
Change the settings on the polling box. You can now change
any of the settings listed in the table above (1.SETUP FILE).
(See page 9-11.)
Enter the password of the polling box. You can now change
any of the settings listed in the table above (1.SETUP FILE).
(See page 9-11.)
Delete the polling box file.
Enter the password of the polling box to delete.
Sub-Settings
–
–
0000 to 9999
–
ON
OFF
–
–
–
–
Chapter 15