l-1100.book Page 7 Friday, December 13, 2002 5:07 PM
Removing Shipping Materials
In order to protect your machine during shipping, it has been packed
with protective material that you must remove before using the machine.
Follow these steps:
N
The actual shipping materials may differ in shape, quantity, and position
from the ones shown below.
1. Remove all pieces of shipping tape from the outside of the machine.
2. Open the operation panel by grasping it with both hands and gently
Chapter 2
HT1-2205-000-V.1.0 LSL User's Guide
pulling it toward you.
Remove the protective sheet from the Automatic Document Feeder
(ADF), then gently close the operation panel by pressing it down
from the center until it clicks.
Setting Up Your Machine
2-7