Table of Contents
Advertisement
l-1100.book Page 33 Friday, December 13, 2002 5:07 PM
Printing Problems
If you are having problems printing with the machine, check the
problems and solutions listed in the following table.
When printing problems occur while printing from your PC, refer to the
Printer Driver Software User's Guide.
Problem
The Alarm lamp comes
on and the machine
beeps while printing?
Nothing prints?
Chapter 13
HT1-2205-000-V.1.0 LSL User's Guide
Possible cause
The machine may have a
paper jam.
The machine may have no
paper jam.
The power cord may not be
connected securely.
The toner cartridge may need
to be replaced.
Frequently Asked Questions
Solution
Clear any paper jams as
described earlier in this
chapter.
Disconnect the power cord,
wait five seconds, then
reconnect it. If the problem
is fixed, the Alarm lamp
will be off, and the LCD
display will show the date
and receiving mode
(standby mode). If the
Alarm lamp stays on, call
your local authorized
Canon Facsimile Dealer.
Make sure the power cord
is connected securely to the
machine and to a wall
outlet.
Replace the toner
cartridge. See page 2-33.
13-33
Advertisement
Table of Contents
