PIAGGIO Beverly Tourer 250 i.e. Service Station Manual page 75

Beverly Tourer 250 i.e.
WARNING
ALL CONTINUITY TESTS MUST BE CARRIED OUT WITH THE CORRESPONDING CONNECTORS
DISCONNECTED.
1) Check the working order of bulbs.
2) Check fuses No. 1 and 10 and the key switch contacts.
3) Check if there is intermittent voltage between the Blue-Black cable of the turn indicator control device
and the ground connection.
4) If there is no voltage, check that the cable harness is not interrupted.
5) Check the turn indicator switch.
6) Check that the Blue-Black cable between the turn indicator control device and the turn indicator switch
is not interrupted.
7) Check that the Pink and White-Blue cables connecting the bulbs and the turn indicator switches are
not interrupted.
8) Check the bulbs ground connection.
level indicators
WARNING
ALL CONTINUITY TESTS MUST BE CARRIED OUT WITH THE CORRESPONDING CONNECTORS
DISCONNECTED.
If faults are detected:
1) With a multimeter, check resistance values be-
tween the White-Green cable and the Black cable
of the fuel level transmitter by moving the arm with
the float.
2) If the transmitter operates correctly but the in-
dication on the instrument panel is not exact,
check that the cable harnesses between them are
not interrupted.
Electric characteristic
Resistance value when the tank is full
<= 7 Ω
Resistance value when the tank is empty
90 +13/-3 Ω
Lights list
1
LIST OF BULBS
Specification
High-/low-beam bulb
Electrical system
Desc./Quantity
Type: Halogen (H4)
Quantity: 1
Power: 12V - 55/60W
ELE SYS - 75