PIAGGIO Beverly Tourer 250 i.e. Service Station Manual page 205

Beverly Tourer 250 i.e.
- Remove the circlip retaining the oil seal.
- Take out the stem.
- Check there are no signs of wear or seizing between the stem and the fork leg. Otherwise, replace
the damaged parts.
Characteristic
Maximum leg diameter
35.10 mm
Minimum stem diameter
34.90 mm
- Take out the oil seal using the appropriate tools.
- Fit the tie rod into the oil seal.
- Insert in sequence the two half-rings per Ø 35-
mm stems.
Specific tooling
020487Y Fork oil seal extractor
Suspensions
SUSP - 205