PIAGGIO Beverly Tourer 250 i.e. Service Station Manual page 158

Injection
1 Throttle body and electronic injection control unit (MIU)
2
3 Water temperature sensor
4
5
6
7 Diagnostics socket connector
8
9 Electric fan remote control
10 Injection load remote control
11
MIU injection system
This vehicle is fitted with an integrated injection and ignition system.
Injection is indirect in the manifold through an electro-injector.
The injection and ignition are timed on the four-stroke cycle by means of a tone wheel keyed on to the
crankshaft (24-2 teeth) and pick-up sensor.
Combustion and ignition are managed on the basis of engine revs and throttle valve opening. Further
corrections are made according to the following parameters:
- Coolant temperature.
- Intake air temperature
- Lambda probe strength
INJEC - 158
DISPOSIZIONE COMPONENTI
Specification
Battery
HV coil
Engine rpm sensor
Lambda sensor
Fuel pump
Fuel injector
Beverly Tourer 250 i.e.
Desc./Quantity
12V - 12 Ah