PIAGGIO Beverly Tourer 250 i.e. Service Station Manual page 189

Beverly Tourer 250 i.e.
Coolant temperature sensor
1
2
3 Water temperature sensor
4
5
With the connector on the control unit side discon-
nected and the coolant temperature sensor con-
nector connected, check that the resistance val-
ues between pin 9 and the ground lead correspond
with the engine temperature.
20° = 2500 ± 100 Ω
80° = 308 ± 6 Ω
With the connector on the control unit side discon-
nected and the coolant temperature connector dis-
connected, check the insulation between the light-
blue/green cable and ground lead.
TEMPERATURE SENSOR
Specification
Instrument panel
Electronic control unit
Engine stop switch
Side stand switch
Injection
Desc./Quantity
INJEC - 189