PIAGGIO Beverly Tourer 250 i.e. Service Station Manual page 37

Beverly Tourer 250 i.e.
Level check
Check coolant when the engine is cold and as in-
dicated in the scheduled maintenance tables, fol-
lowing the steps below.
- Set the vehicle upright on the stand and remove
the cover by undoing screw «A».
- Remove the expansion tank cover «B» by turning
it anticlockwise.
- Look inside the expansion tank and check that
the level is between MIN and MAX. Top up if the
coolant is below the MIN level.
If the level is not correct, proceed to top-up when
the engine is cold. If it is necessary to top up the
coolant frequently, or if the expansion tank is com-
pletely dry, you should look for the cause in the
cooling system.
WARNING
TO AVOID THE RISK OF SCALDING, DO NOT UNSCREW
THE EXPANSION TANK COVER WHILE THE ENGINE IS
STILL HOT.
WARNING
IN ORDER TO AVOID HARMFUL FLUID LEAKS WHILE RID-
ING, IT IS IMPORTANT TO MAKE SURE THAT THE LEVEL
DOES NOT EXCEED THE REFERENCE TONGUE TOO
MUCH.
IN ORDER TO GUARANTEE THE PROPER FUNCTION OF
THE ENGINE, IT IS NECESSARY TO KEEP THE RADIATOR
GRILLE CLEAN.
Recommended products
AGIP PERMANENT SPEZIAL coolant
Maintenance
MAIN - 37