PIAGGIO Beverly Tourer 250 i.e. Service Station Manual page 195

Beverly Tourer 250 i.e.
Injection
Check the power supply line of the injection load
remote control energising coil: after switching to
«ON», make sure there is battery voltage, for 2
seconds, between the Red-White cable and the
Black-Purple cable of the remote control base. If
there is not, check the continuity of the Red-White
cable between the fuse box and the remote control
base and of the Black-Purple cable between the
pin 20 of the control unit and the remote control
base.
N.B.
CONTINUITY TESTS MUST BE CARRIED OUT WITH THE
COMPONENTS DISCONNECTED. (REMOTE CONTROLS,
CONTROL UNIT, FUSES ETC.).
INJEC - 195