Table of Contents
Advertisement
SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
Printable Side In
If the label does not have the loading position,
mark it on the label as instructed in the Setup
Guide.
U Setup Guide
Note:
Be sure the option selected for Roll Type in the
Customize Settings menu matches how the media
is rolled. Roll Type defaults to Printable Side Out.
Be sure to select Printable Side In after loading
media rolled printable side in.
For more information see U
page 64
Basic Operations
E
F
"Roll Type" on
32
Raise the lift lever on the left side of the printer to
lift the media into position, then firmly insert the
roll holder.
If the roll of media has an outer diameter which is
less than 140 mm, lift it up by your hands, and set
it to the roll holder. The roll core will not reach
the holder when raised using the lift lever.
Tighten the roll holder fixing screw until the
screw no longer turns to fix the roll holder in
place.
Advertisement
Table of Contents
