Back - Epson SC-F7100 Series User Manual

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
F
Wiper cleaner
The wiper cleaner removes ink from the wiper. It is a consumable; replacement may be required depending on the
status.
"Replacing the Wiper Cleaners and Wipers" on page 93
U
G
Suction caps
These caps absorb the ink from the tips of the print head nozzles. Do not touch the insides of the suction caps. The
part maybe deformed, and it may no longer be possible to perform capping correctly.
H
Anti-drying caps
Except during printing, these caps cover the print head nozzles to prevent them drying out. Cleaning may be
required depending on the status.
"Cleaning the Caps" on page 81
U
I
Wiper
The wiper removes ink from the print head nozzles. It is a consumable; cleaning or replacement may be required
depending on the status.
"Cleaning Wiper and Attachment Point" on page 80
U
"Replacing the Wiper Cleaners and Wipers" on page 93
U

Back

The illustration shows the display for the SC-F7000 Series.
A
Drive switch
The drive switch is used to feed the media during loading and to rewind the media for replacement.
B
Roll holder
Place media on these holders. There are two supports: one on the left and one on the right.
Introduction
17