Epson SC-F7100 Series User Manual page 160

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
C
Loosen the roll core holder locking screws and
adjust the roll core holders so that the distance
between the two is wider than the roll core.
D
Tighten the roll core holder locking screw to
align the right roll core holder with the position
of dotted line.
Appendix
E
Insert the roll core into the right roll holder.
Insert the left roll core holder into the roll core,
and then tighten the roll core holder locking
screw.
c
Important:
Insert the left roll holder into the roll core until
part A in the illustration below cannot be
seen, and then tighten the roll holder locking
screw.
160